Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard. Remove the camera by gently pulling upward with a pair of tweezers. Remove the camera by gently pulling upward with a pair of tweezers.
  • Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard.

  • Remove the camera by gently pulling upward with a pair of tweezers.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.