Traduci il passo n. 5 - MacBook Unibody Model A1278 Logic Board Replacement - iFixit

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida

Inglese

Giapponese

Passaggio precedente Passo successivo

Traduzione in corso passo 5

Passo 5

Using the tip of a spudger, flip up the keyboard ribbon cable retaining flap.

Pull the keyboard ribbon cable straight out of its socket.

If the smaller connector at the right side of the keyboard ribbon cable is populated by another small black ribbon cable, remove it in a similar way to the above.

Using the tip of a spudger, flip up the keyboard ribbon cable retaining flap.
Pull the keyboard ribbon cable straight out of its socket.
If the smaller connector at the right side of the keyboard ribbon cable is populated by another small black ribbon cable, remove it in a similar way to the above.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.