Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
When you reach the pump cylinder, lift the pipe so that the pump cylinder is just below the base clamp, but is not contacting it.
-
Secure the riser main with the base clamp.
-
Stabilize the pipe by holding it and unbolt the base clamp from the pump base.
-
Lift the riser main, pump cylinder, and base clamp straight up out of the well.
-
Set the cylinder down carefully to prevent damage, preferably on a clean surface.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.