Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Remove the two screws at the top of the keyboard Guide the keyboard towards the LCD, and lift up slightly, be careful of the ribbon cable underneath Using a spudger or fingernail, carefully push one side, then the other of the keyboard ribbon connector toward the LCD, releasing it.
  • Remove the two screws at the top of the keyboard

  • Guide the keyboard towards the LCD, and lift up slightly, be careful of the ribbon cable underneath

  • Using a spudger or fingernail, carefully push one side, then the other of the keyboard ribbon connector toward the LCD, releasing it.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.