Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Attaching the saddle to the frame is a piece of cake. Take the saddle and apply assembly paste to the bottom part of the seat post, around the clamping area of it and inside the seat tube. Slide the saddle into the seat tube while pulling out the cable at the lower end of the tube. Note the minimum and maximum height markings on the seat post.
Saddle montage
  • Attaching the saddle to the frame is a piece of cake. Take the saddle and apply assembly paste to the bottom part of the seat post, around the clamping area of it and inside the seat tube.

  • Slide the saddle into the seat tube while pulling out the cable at the lower end of the tube.

  • Note the minimum and maximum height markings on the seat post.

  • Tighten the bolt of the clamp with the torque wrench.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.