Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Loosen the bolts of the stem with the torque wrench and remove its faceplate completely. Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body. Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.
Bar montage
  • Loosen the bolts of the stem with the torque wrench and remove its faceplate completely.

  • Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.