Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 19

Passo 19
Connect both the SATA data and SATA power connectors to their respective sockets on the SSD. Peel the backing off of the double sided tape. Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.
  • Connect both the SATA data and SATA power connectors to their respective sockets on the SSD.

  • Peel the backing off of the double sided tape.

  • Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.

  • Do not repeatedly stick and un-stick the tape, as the adhesive will become weaker.

  • Once you are happy with the SSD's placement, firmly press down along its edges to ensure full adhesion.

  • When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.

Collegare i connettori SATA di alimentazione e dei dati ai rispettivi connettori femmina dell'SSD.

Rimuovere il rivestimento dal nastro biadesivo.

Posizionare con attenzione l'SSD nell'alloggiamento ottico dell'iMac, il più vicino possibile all'angolo inferiore sinistro.

Non staccare e riattaccare il nastro ripetutamente, poiché ciò indebolirebbe l'adesivo.

Una volta soddisfatti del posizionamento dell'SSD, premere con fermezza lungo i bordi per garantire un'adesione completa.

Durante la reinstallazione dell'unità ottica, il connettore SATA verrà bloccato fra il rivestimento in schiuma e l'unità ottica.

[* black] Connect both the SATA data and SATA power connectors to their respective sockets on the SSD.
[* black] Peel the backing off of the double sided tape.
[* black] Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.
[* icon_caution] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* icon_caution] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with the SSD's placement, firmly press down along its edges to ensure full adhesion.
[* icon_note] When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.