Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 13

Passo 13
Locate the IR sensor located behind the black Apple logo. If necessary, peel back the tape covering the IR sensor.
  • Locate the IR sensor located behind the black Apple logo.

  • If necessary, peel back the tape covering the IR sensor.

  • Detach the IR sensor by pulling it straight up and out from the case.

  • Do not attempt to completely remove the IR sensor from the iMac as it is still attached to the logic board.

Individuare il sensore infrarossi dietro il logo Apple nero.

Se necessario staccare il nastro che copre il sensore infrarossi.

Rimuovere il sensore infrarossi estraendolo verso l'alto fuori dal case.

Non tentare di rimuovere completamente il sensore infrarossi dal case, poiché è ancora collegato alla scheda logica.

[* red] Locate the IR sensor located behind the black appleApple logo.
[* icon_note] If necessary, peel back the tape covering the IR sensor.
[* black] RemoveDetach the IR sensor by pulling it straight up and out offrom the case.
[* icon_caution] Do not attempt to completely remove the IR sensor from the caseiMac as it is still attached to the logic board.
[* red] Locate the IR sensor located behind the black appleApple logo.
[* icon_note] If necessary, peel back the tape covering the IR sensor.
[* black] RemoveDetach the IR sensor by pulling it straight up and out offrom the case.
[* icon_caution] Do not attempt to completely remove the IR sensor from the caseiMac as it is still attached to the logic board.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.