Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
This step brings your hands close to the exposed rear of the power supply. To avoid a high-voltage shock from the many large capacitors attached to the board, do NOT touch the rear of the power supply.
  • This step brings your hands close to the exposed rear of the power supply. To avoid a high-voltage shock from the many large capacitors attached to the board, do NOT touch the rear of the power supply.

  • Disconnect the LED backlight driver cable with your hand by pressing the tab down and sliding it towards the bottom of the display.

この作業では、素手を電源ユニットの背面に差し入れます。電源ユニットの背面のボードがむき出しになっていますが、大容量コンデンサに帯電している高電圧の電流が流れますので、絶対に触れないでください。

手でコネクタのつまみを押し下げながらディスプレイ下部に向かってずらし、液晶パネルのLEDケーブルを外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.