Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Francese

Traduzione in corso passo 4

Passo 4
Prepare your component for soldering by removing any excess solder from the contacts. The contacts should be clean enough to pass through the solder pad holes.
  • Prepare your component for soldering by removing any excess solder from the contacts. The contacts should be clean enough to pass through the solder pad holes.

  • Run the soldering iron tip down the lengths of each contact to wipe the solder away from the component. Clean the iron's tip between strokes by wiping it against a moist sponge.

  • Excessive heat will damage the components, so do not apply the soldering iron to the component for long amounts of time.

Préparez votre composant pour la soudure en enlevant tout surplus de soudure des pattes. Les pattes doivent être suffisamment propres pour passer à travers les trous des pastilles de soudure.

Faites glisser la panne du fer à souder sur le long de chaque patte pour essuyer la soudure du composant. Nettoyez la panne du fer à souder en l'essuyant avec une éponge humide.

Trop de chaleur risque d’endommager le composant, n'appliquez pas le fer à souder sur le composant pendant de longues périodes.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.