Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Olandese

Traduzione in corso passo 13

Passo 13
The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.
  • The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.

De soldeerverbinding zou er als een kleine kraal of heuvel uit moeten zien. Als het plat of puntig is, plaats je de soldeerbout opnieuw op de verbinding en trek je de bout weer weg. Als dit niet werkt zul je wellicht wat meer soldeertin toe moeten dienen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.