Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 13

Passo 13
The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.
  • The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.

はんだの玉はドームまたは半球のような外観となります。平坦だったり、ギザギザになっている場合は、はんだに再度はんだごてを当てて溶かしてから、はんだごてを離します。うまく行かない場合は、少量のはんだの付け足しが必要となることがあります。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.