Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Cinese

Traduzione in corso passo 12

Passo 12
We recommend that you clean the surface-mount solder pads with a soft cloth, sponge, or toothbrush and a small amount of rubbing alcohol.
  • We recommend that you clean the surface-mount solder pads with a soft cloth, sponge, or toothbrush and a small amount of rubbing alcohol.

  • To melt a small bead of solder onto each solder pad:

  • Place the tip of the soldering iron against the solder pad.

  • Melt solder so that it forms a dome on top of the pad.

  • Remove both the solder and the soldering iron tip from the solder pad as soon as enough solder melts onto the pad.

我们建议你使用软布、海绵或牙刷和少量外用酒精清洁表面贴装焊盘。

要将一小块焊料熔化到每个焊盘上:

将烙铁头放在焊盘上。

熔化焊料,使其在焊盘顶部形成圆顶形状。

一旦足够的焊料熔化到焊盘上,请从焊盘上移走焊料和烙铁头。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.