Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 12

Passo 12
We recommend that you clean the surface-mount solder pads with a soft cloth, sponge, or toothbrush and a small amount of rubbing alcohol.
  • We recommend that you clean the surface-mount solder pads with a soft cloth, sponge, or toothbrush and a small amount of rubbing alcohol.

  • To melt a small bead of solder onto each solder pad:

  • Place the tip of the soldering iron against the solder pad.

  • Melt solder so that it forms a dome on top of the pad.

  • Remove both the solder and the soldering iron tip from the solder pad as soon as enough solder melts onto the pad.

柔らかい布もしくはスポンジ、歯ブラシと少量の消毒用アルコールを使用して、表面実装はんだパッドを清掃することをおすすめします。

小さいはんだの玉を各はんだパッドに溶かすには、次の手順を実行します。

はんだごての先端をはんだパッドに当てます。

パッドの上にドームが形成されるように、はんだを溶かします。

十分な量のはんだがパッドに溶け込んだら、すぐにはんだパッドからはんだとはんだごてを離します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.