Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Cinese

Traduzione in corso passo 8

Passo 8
It is common for solder to cover up some of the holes through solder pads on the board.  Opening these holes greatly simplifies soldering. Open the holes through the solder pads by pressing a straightened staple against the blockage while heating the same pad from the other side of the board.
  • It is common for solder to cover up some of the holes through solder pads on the board. Opening these holes greatly simplifies soldering.

  • Open the holes through the solder pads by pressing a straightened staple against the blockage while heating the same pad from the other side of the board.

  • A "third hand" tool (or a friend) can greatly help in this procedure.

焊料通常是通过电路板上的焊盘掩盖一些孔。 打开这些孔大大简化了焊接。

在从板的另一侧加热相同的垫片时,通过将一个钉子压靠在堵塞物上,通过焊盘打开孔。

第三只手”工具(或朋友)可以在此过程中大大帮助。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.