Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Olandese

Traduzione in corso passo 8

Passo 8
It is common for solder to cover up some of the holes through solder pads on the board.  Opening these holes greatly simplifies soldering. Open the holes through the solder pads by pressing a straightened staple against the blockage while heating the same pad from the other side of the board.
  • It is common for solder to cover up some of the holes through solder pads on the board. Opening these holes greatly simplifies soldering.

  • Open the holes through the solder pads by pressing a straightened staple against the blockage while heating the same pad from the other side of the board.

  • A "third hand" tool (or a friend) can greatly help in this procedure.

Het is normaal dat de soldeertin sommige van de soldeergaten op de printplaat bedekt. Het openen van deze soldeergaten zat het solderen een stuk gemakkelijker maken.

Open de soldeergaten door een rechtgebogen nietje door de tin heen te steken terwijl je de tin tegelijkertijd vanaf de andere kant van de printplaat verwarmt.

Een "derde hand-tool" (of een vriend) kan hierbij erg handig zijn.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.