Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Cinese

Traduzione in corso passo 6

Passo 6
To solder each connection: Place the tip of the soldering iron against the solder pad. Melt just enough solder onto the solder pad so that the capacitor's contact lead holds firmly in place.
  • To solder each connection:

  • Place the tip of the soldering iron against the solder pad.

  • Melt just enough solder onto the solder pad so that the capacitor's contact lead holds firmly in place.

  • Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad.

焊接连接:

将烙铁头放在焊盘上。

将足够的焊料熔化到焊盘上,以使电容器的触点引线牢固地固定到位。

一旦足够的焊料熔化到焊盘上,移走烙铁和焊料。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.