Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Olandese

Traduzione in corso passo 6

Passo 6
To solder each connection: Place the tip of the soldering iron against the solder pad. Melt just enough solder onto the solder pad so that the capacitor's contact lead holds firmly in place.
  • To solder each connection:

  • Place the tip of the soldering iron against the solder pad.

  • Melt just enough solder onto the solder pad so that the capacitor's contact lead holds firmly in place.

  • Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad.

Om iedere verbinding vast te solderen:

Plaats je de soldeerbout op het soldeer in de openingen.

Laat je genoeg soldeertin smelten om de verbindingen direct goed vast te kunnen zetten.

Verwijder je de soldeertin en de soldeerbout zodra er genoeg soldeertin rondom de verbindingen zit.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.