Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 6

Passo 6
To solder each connection: Place the tip of the soldering iron against the solder pad. Melt just enough solder onto the solder pad so that the capacitor's contact lead holds firmly in place.
  • To solder each connection:

  • Place the tip of the soldering iron against the solder pad.

  • Melt just enough solder onto the solder pad so that the capacitor's contact lead holds firmly in place.

  • Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad.

それぞれの接点をはんだ付けするには、次の手順を行います。

はんだごての先端を、はんだパッドに押し当てます。

コンデンサのリードが、正しい位置にしっかりと固定される程度の量のはんだを溶かして、はんだパッドに流し込みます。

十分な量のはんだがパッドに流れ込んだら、すぐにはんだとはんだごての先端を接点から離します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.