Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Olandese

Traduzione in corso passo 3

Passo 3
When the tool has completely passed through the hole, enlarge the hole by heating the top side of the solder pad while pressing through with the tool. Both solder holes should now be open enough to insert the bare leads of your component.
  • When the tool has completely passed through the hole, enlarge the hole by heating the top side of the solder pad while pressing through with the tool.

  • Both solder holes should now be open enough to insert the bare leads of your component.

Als je tool helemaal door de opening heen is gekomen, vergroot je de opening door de bovenkant van de opening te verwarmen en ook daar je tool doorheen te duwen.

Beide soldeeropeningen zouden nu groot genoeg moeten zijn om de verbindingen van je onderdeel te kunnen plaatsen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.