Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Francese

Traduzione in corso passo 3

Passo 3
When the tool has completely passed through the hole, enlarge the hole by heating the top side of the solder pad while pressing through with the tool. Both solder holes should now be open enough to insert the bare leads of your component.
  • When the tool has completely passed through the hole, enlarge the hole by heating the top side of the solder pad while pressing through with the tool.

  • Both solder holes should now be open enough to insert the bare leads of your component.

Lorsque l'outil a complètement traversé le trou, agrandissez le trou en chauffant le côté supérieur de la pastille de soudure pendant que vous appuyez sur l'outil.

Les deux trous de soudure devraient maintenant être suffisamment ouverts pour que vous puissiez y insérer les pattes de votre composant.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.