Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Cinese

Traduzione in corso passo 1

Passo 1
To start, let's solder a large component held to a circuit board with thru-hole solder pads.
Beginning Guide
  • To start, let's solder a large component held to a circuit board with thru-hole solder pads.

  • A capacitor was already removed from the two solder pads. Each pad was heated while the capacitor was pulled away from the board.

  • Notice how the solder holes are completely covered with solder. Opening these holes -- so the capacitor lead can be pushed through -- will greatly simplify installation.

首先,我们用通孔焊盘焊接固定在电路板上的大元件。

已经从两个焊盘去除了电容。 当电容从板上拉出时,每个焊盘都已被加热。

请注意那些孔是否完全被焊料完全覆盖。 打开这些孔 - 径直将电容从孔中推入就好 - 安装十分简单。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.