Salta al contenuto principale

Remplacement d’une touche du clavier du Toshiba Satellite A665-S5170

Inglese
Francese

Traduzione in corso passo 2

Passo 2
Toshiba Satellite A665-S5170 Key Replacement: passo 0, immagine 1 di 3 Toshiba Satellite A665-S5170 Key Replacement: passo 0, immagine 2 di 3 Toshiba Satellite A665-S5170 Key Replacement: passo 0, immagine 3 di 3
  • Grip the upper edge of the key pad--the white hinge beneath the key cap of the key--with your flat nose pliers.

  • With the edge of the key pad pinched firmly in your pliers, gently pull up with your pliers until the top left and right corners of the key pad pop out of place.

  • Still holding the key pad with your pliers, slide the key pad towards the bottom of the key panel until the bottom of the key pad slides out of its hinge.

  • Lift the key pad fully from the computer with your pliers.

Prenez le bord supérieur de la fixation de la touche, la charnière blanche sous la touche, avec votre pincette de précision plate.

Lorsque vous aurez saisi le bord de la fixation fermement avec votre pincette de précision, tirez délicatement avec votre pincette jusqu’à ce que les coins gauches et droits de la fixation se détachent.

Tout en maintenant la fixation avec votre pincette, faites glisser la fixation vers le bas jusqu’à ce que le bas de la fixation sorte de sa charnière.

Sortez complètement la fixation de l’ordinateur avec votre pincette.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.