Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 28

Passo 28
Unscrew 4 screws from the underside of the Roomba. Screws will separate from underside plastic plate. Spray with cleaning solution and clean with paper towel. Follow up with smaller cleaning tools if needed. Set aside for later installation.
  • Unscrew 4 screws from the underside of the Roomba. Screws will separate from underside plastic plate.

  • Spray with cleaning solution and clean with paper towel. Follow up with smaller cleaning tools if needed.

  • Set aside for later installation.

Dévissez 4 vis de la face inférieure du Roomba. Les vis se sépareront de la plaque en plastique inférieure.

Pulvérisez avec une solution nettoyante et nettoyez avec une serviette en papier. Continuez avec des outils de nettoyage plus petits si nécessaire.

Laissez de côté pour une installation ultérieur.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.