Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 21

Passo 21
Replace 4 screws on the ends of the brush. Run the zip-tie through holes near the center of the brush. Secure the zip tie and clip of any excess.
  • Replace 4 screws on the ends of the brush.

  • Run the zip-tie through holes near the center of the brush. Secure the zip tie and clip of any excess.

  • Re-attach yellow bearing and two yellow endcaps.

  • Set aside for later installation.

Revissez les 4 vis sur les extrémités de la brosse.

Inserez l' attaches dans les trou près du centre de la brosse puis fixez l'attache.

Remontez le roulement jaune et les deux bouchons jaunes.

Mettez les brosses de côté pour une installation ultérieure.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.