Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 1

Passo 1
Insert the plastic opening tool into the middle of the bottom edge of the device. The tool should be inserted within the seam between the back and front covers. Slide the opening tool to the right and slowly continue to separate the back cover from the device. Avoid prying on the buttons, as they are easily damaged.
  • Insert the plastic opening tool into the middle of the bottom edge of the device. The tool should be inserted within the seam between the back and front covers.

  • Slide the opening tool to the right and slowly continue to separate the back cover from the device.

  • Avoid prying on the buttons, as they are easily damaged.

Insérez l'outil d'ouverture en plastique au centre du bord inférieur de l'appareil. L'outil doit être inséré dans la couture entre la couverture arrière et la couverture avant.

Faites glisser l'outil d'ouverture vers la droite et continuez lentement à séparer le capot arrière de l'appareil.

Évitez de faire levier sur les boutons, car ils sont facilement endommagés.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.