Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Removing the trackpad requires as little effort as it did with other two 2016 MBP models—we simply spin out thirteen T5 screws and the trackpad is ours. And this one is a monster, nearly holding its own beside an iPad mini 2. Now we know which trackpad in the family has been taking its vitamins.
  • Removing the trackpad requires as little effort as it did with other two 2016 MBP models—we simply spin out thirteen T5 screws and the trackpad is ours.

  • And this one is a monster, nearly holding its own beside an iPad mini 2.

  • Now we know which trackpad in the family has been taking its vitamins.

  • We're not surprised to find the same ICs on this trackpad as we did in both 13" MBPs. However, with the increased size, Apple had to add a second touch controller to digitize all that extra trackpad:

  • STMicroelectronics STM32F103VB ARM Cortex-M3 MCU

  • Broadcom BCM5976C1KUFBG Touch Controller x2

  • Maxim Integrated MAX11291ENX 24-Bit, 6-Channel Delta-Sigma ADC

La rimozione del trackpad richiede lo stesso, modesto sforzo necessario per effettuare la stessa operazione con gli altri due MBP modello 2016: ci basta svitare 13 viti T5 per fare nostro il trackpad.

E questo trackpad è un mostro, in grado di confrontarsi con un iPad mini 2.

Qra sappiamo quale dei trackpad della famiglia ha preso le vitamine.

Non siamo sorpresi nel trovare in questo trackpad gli stessi IC rinvenuti in entrambi gli MBP da 13". Però, data la dimensione superiore, Apple ha dovuto aggiungere un secondo controller touch per coprire la superficie extra:

MCU ARM Cortex-M3 STMicroelectronics STM32F103VB

x2 controller touch Broadcom BCM5976C1KUFBG

ADC Delta-Sigma a 6 canali e 24 bit Maxim Integrated MAX11291ENX

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.