Skip to main content
Inglese
Italiano

Traduzione in corso passo 1

Step 1
Remove the small black screws along the edges of the control panel on the top of the device. Pry off the top control panel using the plastic wedge tool. Remove the screw from the front, gray panel located beneath the "Scene Select AE" label.
  • Remove the small black screws along the edges of the control panel on the top of the device.

  • Pry off the top control panel using the plastic wedge tool.

  • Remove the screw from the front, gray panel located beneath the "Scene Select AE" label.

  • Remove the two small black screws on the top of the front, gray panel of the device, above the red AUTOFOCUS letters.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.