Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Remove the following screws securing the logic board to the case:
  • Remove the following screws securing the logic board to the case:

  • One 2.5 mm Phillips screw near the vibrator motor

  • One 2.4 mm Phillips screw

  • One 3.6 mm standoff along the side of the logic board nearest the battery opening.

  • Use a standoff driver bit and driver handle to remove the single 3.6 mm standoff screw.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Rimuovi le seguenti viti che fissano la scheda logica al case:

Una vite Phillips da 2,5 mm vicino al motore di vibrazione

Una vite Phillips da 2,4 mm

Un distanziale a vite da 3,6 mm lungo il lato della scheda logica vicino all'apertura della batteria.

Usa una punta per distanziali o un piccolo cacciavite a taglio per rimuovere il singolo distanziale da 3,6 mm.

[* black] Remove the following screws securing the logic board to the case:
[* red] One 2.5 mm Phillips screw near the vibrator motor
[* orange] One 2.4 mm Phillips screw
[* yellow] One 3.6 mm standoff along the side of the logic board nearest the battery opening.
[* icon_note] Use a [product|IF145-343|standoff driver bit|new_window=true] or a small flathead screwdriver toand [product|IF145-326|driver handle|new_window=true] to remove the single 3.6 mm standoff screw.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* icon_note] Use a [product|IF145-343|standoff driver bit|new_window=true] or a small flathead screwdriver toand [product|IF145-326|driver handle|new_window=true] to remove the single 3.6 mm standoff screw.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.