Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 20

Passo 20
Carefully align the bezel tooling pin into in the tooling holes at the top of the display assembly.  Set the bezel in place and apply pressure. Pull the rest of the red backing strips to expose the adhesive to the rest of the bezel. While applying pressure with the flat side of the spudger, rub around the entire bezel to ensure the adhesive sets properly.
  • Carefully align the bezel tooling pin into in the tooling holes at the top of the display assembly. Set the bezel in place and apply pressure.

  • Pull the rest of the red backing strips to expose the adhesive to the rest of the bezel.

  • While applying pressure with the flat side of the spudger, rub around the entire bezel to ensure the adhesive sets properly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.