Traduzione in corso passo 3
Passo 3
-
While applying heat with a heat gun:
-
Place the flat edge of the spudger under the bottom lip of the bezel on the lower right portion of the display assembly.
-
Gently pry the corner of the bezel upward, creating enough space to insert the flat edge of the spudger between the bezel and display assembly.
-
With the flat edge of the spudger under the bezel, gently twist the spudger to release the double stick adhesive tape.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.