Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
The back panel must be removed in order to proceed. Slide the cover so that it is fully extended.
  • The back panel must be removed in order to proceed. Slide the cover so that it is fully extended.

  • The arrows in the picture indicate two small holes located at the top of the device. Insert a paper clip or a tack simultaneously into each of these holes and moderately push downward.

  • The springs will give as pressure is exerted. Once you feel this take place, pull down the cover with the paper clip/tack while continuing to push downward. This will release the back cover.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.