Aggiusta le tue cose Community Store

iPad 2 CDMAのドックコネクタの交換

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 3

Passo 3
iPad 2 CDMA Dock Connector Replacement: passo 0, immagine 1 di 3 iPad 2 CDMA Dock Connector Replacement: passo 0, immagine 2 di 3 iPad 2 CDMA Dock Connector Replacement: passo 0, immagine 3 di 3

  • Use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable.

  • Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

  • Peel the dock connector ribbon cable off the rear panel.

  • Do not try to completely remove the cable, as it is still securely attached to the rear panel.

プラスチックの開口ツールを使って、ドックコネクタケーブルの先端を覆っているテープの一部を剥がします。

プラスチックの開口ツールを使って、慎重にドックコネクタケーブルのコネクタを、ロジックボード上のソケットからこじ開けます。

ドックコネクタのリボンケーブルを、リアパネルから剥がします。

ケーブルを完全に外さないでください。リアパネルに装着された状態です。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.