Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
During reassembly, be sure to carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector. Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
Reassembly tip
  • During reassembly, be sure to carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector.

  • Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

Durante el re-ensamble, asegura de posicionar cuidadosamente el contacto de presión en su lugar. Debería estar encima del poste el tornillo Phillips mostrado, y el contacto dorado debería apuntar hacia el conector de la batería.

Asegúrate de limpiar el contacto de presión con un desengrasante como windex o alcohol isopropílico. El aceite en tus dedos tiene el potencial de crear interferencia inalámbrica.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.