Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
During reassembly, be sure to carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector. Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
Reassembly tip
  • During reassembly, be sure to carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector.

  • Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

Achte beim Zusammenbau darauf, dass du den Druckstecker sorgfältig an seinem alten Platz ausrichtest. Er muss, wie auf den Bildern gezeigt, auf dem Stift für die Kreuzschlitzschraube aufliegen. Dabei muss der Goldkontakt in Richtung Akkuanschluss zeigen.

Säubere den Druckstecker mit einem Fettlöser wie Isopropylakohol oder Windex, bevor du ihn wieder einsetzt. Die Fette an deinen Händen können Störungen an der Funkverbindung verursachen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.