Apple AirPort Express Base Station Power Supply Kit

Inglese

Italiano

Traduzione in corso passo 13

Passo 13

Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.
Be sure to route the leads so that they do not cover any of the indicated holes in steps 7 and 8.
Solder the resistor to the PCB and clip off the excess leads.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.