Aggiusta la tua roba

Diritto alla Riparazione

Store

Torna alla Guida
Inglese
Italiano
Passaggio precedente Passo successivo

Traduzione in corso passo 6

Passo 6
Turn the monitor on its side so that the power supply and circuit board are facing to the right Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total). Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total).

  • Turn the monitor on its side so that the power supply and circuit board are facing to the right

  • Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total).

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.