Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
Insert the flat end of the spudger between the front panel and the rear case at the lower left edge of the iPhone. Slide the spudger up the left edge of the phone starting at the lower edge and moving towards the volume control buttons and silent switch, breaking up the adhesive holding the display in place. Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.
  • Insert the flat end of the spudger between the front panel and the rear case at the lower left edge of the iPhone.

  • Slide the spudger up the left edge of the phone starting at the lower edge and moving towards the volume control buttons and silent switch, breaking up the adhesive holding the display in place.

  • Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.

iPhone左側下部のフロントパネルと背面ケースの隙間から、スパッジャーの平面側先端を差し込みます。

スパッジャーをデバイスの左側端に沿って上部の音量ボタンやサイレントスイッチに向かってスライドさせます。動かしながら、ディスプレイに留められている接着剤を剥がしていきます。

ディスプレイ上部先端を背面ケースからこじ開けないでください。プラスチックのクリップによって留められた状態にします。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.