Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
Insert the flat end of the spudger between the front panel and the rear case at the lower left edge of the iPhone. Slide the spudger up the left edge of the phone starting at the lower edge and moving towards the volume control buttons and silent switch, breaking up the adhesive holding the display in place. Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.
  • Insert the flat end of the spudger between the front panel and the rear case at the lower left edge of the iPhone.

  • Slide the spudger up the left edge of the phone starting at the lower edge and moving towards the volume control buttons and silent switch, breaking up the adhesive holding the display in place.

  • Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.

Inserta el extremo plano del spudger entre el panel frontal y la carcasa trasera en el borde inferior izquierdo del iPhone.

Desliza el spudger por el borde izquierdo del teléfono comenzando en el borde inferior y moviéndose hacia los botones de control de volumen y el interruptor silencioso, rompiendo el adhesivo que mantiene la pantalla en su lugar.

No intentes sacar el borde superior de la pantalla de la carcasa posterior, ya que se sujeta con clips de plástico que se pueden romper.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.