Skip to main content
Inglese
Italiano

Traduzione in corso passo 1

Step 1
The Bluetooth board is located on the upper case. Remove the two Phillips screws securing the black antenna holder to the upper case. Lift the black Bluetooth antenna holder off of the upper case.
  • The Bluetooth board is located on the upper case.

  • Remove the two Phillips screws securing the black antenna holder to the upper case.

  • Lift the black Bluetooth antenna holder off of the upper case.

  • Disconnect the Bluetooth antenna cable from the Bluetooth board.

  • Lift the Bluetooth antenna out of its housing in the upper case. The Bluetooth antenna may be secured to the upper case with an adhesive, so rocking the antenna board from side to side may help it come free easier.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.