Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 17

Passo 17
To connect the new hard drive, we need to modify some cables. The hard drive has a standard 15 pin SATA power connection, but the logic board has a 6 pin slim SATA power connection. A cable to connect them doesn't exist (yet), so we're going to make one. The two cables you need are:
  • To connect the new hard drive, we need to modify some cables.

  • The hard drive has a standard 15 pin SATA power connection, but the logic board has a 6 pin slim SATA power connection. A cable to connect them doesn't exist (yet), so we're going to make one.

  • The two cables you need are:

  • 15 pin Female SATA power to 4 pin Male Molex power.

  • 13 pin Male Slimline SATA to 7 pin Female SATA / 4 pin Male Molex power.

  • We tried a Molex adapter to connect the two (male) power cables together. However, the bulky Molex connectors are difficult to fit inside the mini.

  • Cut the white Molex connectors off both cables. The excess cable has to fit inside the mini, so just leave 3-4" on each cable.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.