Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 14

Passo 14
Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place. Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. Your newly-installed drive should look very similar to the third picture.
  • Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place.

  • Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive.

  • Your newly-installed drive should look very similar to the third picture.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.