Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 13

Passo 13
Hold the new drive in place and attach it to the frame using the four Phillips screws. Plug the interconnect board into the new drive, making sure that all wires are in their original place. Route the black thermal sensor wire back through the notch.
  • Hold the new drive in place and attach it to the frame using the four Phillips screws.

  • Plug the interconnect board into the new drive, making sure that all wires are in their original place.

  • Route the black thermal sensor wire back through the notch.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.