Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 12

Passo 12
Unplug the interconnect board from the hard drive. The interconnect board is still held in place by other connectors. Make sure that the they are not separated from the interconnect board. Remove the four Phillips screws that hold the drive in place.
  • Unplug the interconnect board from the hard drive.

  • The interconnect board is still held in place by other connectors. Make sure that the they are not separated from the interconnect board.

  • Remove the four Phillips screws that hold the drive in place.

  • The stock hard drive can now be removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.