Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Turn off the power and remove the battery before working on your Eee PC
  • Turn off the power and remove the battery before working on your Eee PC

  • Start by removing the keyboard

  • There are four latches on the top of the keyboard, use a paper clip or other object to disengage the latches

  • You may have to pull the keyboard up enough with the object - there is no spring mechanism to pop the keyboard out. One trick is after lifting it enough, to slide it (not too much) upward to remove the bottom side.

  • The keyboard assembly has also two plastic retention points on the sides, and some thermal tape sticking the keyboard down.

  • Caution: the keyboard has a ribbon connector underneath it which must be carefully unplugged before fully removing the keyboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.