Salta al contenuto principale

Sostituzione scheda UI Teenage Engineering OP-1

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Teenage Engineering OP-1 UI Board Replacement: passo 0, immagine 1 di 3 Teenage Engineering OP-1 UI Board Replacement: passo 0, immagine 2 di 3 Teenage Engineering OP-1 UI Board Replacement: passo 0, immagine 3 di 3
  • The display is held in place with a mild adhesive. A spudger helps you to get it free.

  • Be careful since the flex cable is still connected.

  • Make sure the display won't be damaged when you flip it over to the front to access the UI board.

Il display è tenuto in posizione con un adesivo poco tenace. Per liberarlo, aiutati con uno spudger.

Fai attenzione perché il cavo flessibile è ancora collegato.

Accertati di non danneggiare il display quando lo rovesci verso il davanti per accedere alla scheda UI.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.