Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Use the flat end of a spudger to disconnect the headphone jack from its socket on the logic board. Use the spudger to peel the headphone jack ribbon cable off the rear case. Use the spudger to peel the headphone jack ribbon cable off the rear case.
  • Use the flat end of a spudger to disconnect the headphone jack from its socket on the logic board.

  • Use the spudger to peel the headphone jack ribbon cable off the rear case.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.