Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 17

Passo 17
Use an opening pick to separate the adhesive connecting the lightning connector cable to the iPad case. If you push with pick too hard, or slip, you could sever the Lightning port cable. You should not need a lot of force, if you are struggling, reapply an iOpener to the back of the case to warm the adhesive.
  • Use an opening pick to separate the adhesive connecting the lightning connector cable to the iPad case.

  • If you push with pick too hard, or slip, you could sever the Lightning port cable.

  • You should not need a lot of force, if you are struggling, reapply an iOpener to the back of the case to warm the adhesive.

Utilisez un médiator pour décoller l'adhésif reliant la nappe du connecteur de charge Lightning à la coque de l'iPad.

Si vous appuyez avec trop de force, ou dérapez, vous risquez de couper la nappe du connecteur de charge Lightning.

Vous ne devriez pas avoir besoin de forcer. Si vous avez du mal, réappliquez un iOpener à l'arrière de la coque pour réchauffer l'adhésif.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.