Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 4

Passo 4
Use the flat end of a spudger to lift the rear-facing camera cable connector from its socket on the logic board. Lift the sensor cable connector from its socket. Disconnect the right cellular antenna from the logic board.
  • Use the flat end of a spudger to lift the rear-facing camera cable connector from its socket on the logic board.

  • Lift the sensor cable connector from its socket.

  • Disconnect the right cellular antenna from the logic board.

Utilisez l'extrémité plate d'un spudger pour tirer le connecteur de la nappe de la caméra arrière hors de sa prise sur la carte mère.

Retirez le connecteur de la nappe des capteurs de sa prise.

Déconnectez l'antenne cellulaire droite de la carte mère.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.