Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 17

Passo 17
Use eight of the short Phillips #0 screws to secure the rear body. Remember, the single long screw goes below the barrel. Use two more short screws to reconnect the two halves of the cocking mechanism.
Replace body screws.
  • Use eight of the short Phillips #0 screws to secure the rear body.

  • Remember, the single long screw goes below the barrel.

  • Use two more short screws to reconnect the two halves of the cocking mechanism.

  • Lastly, slide the cocking mechanism back slightly to reveal the last two screw holes. Use your last two short screws to secure the front body.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.